项目名称： 丝密特 高散热高导热硅脂3.0

Smit, high heat dissipation and high thermal conductivity grease 3.0

申报单位： 中山市丝密特硅胶制品有限公司

综合介绍或申报理由：

本产品采用较好的原料和配方生产，使用导热性和绝缘性良好的金属氧化物与有机硅氧烷复合而成。产品具有良好的导热性和电绝缘性，较宽的使用温度（工作温度-50℃/+200℃），很好的使用稳定性，较低的稠度和良好的施工性能，本品不干、不溶解，是一种适用于热源和散热器之间的导热材料。

This product is produced with better raw materials and formulas, and is made of metal oxide and organosiloxane compound with good thermal conductivity and insulation. The product has good thermal conductivity and electrical insulation, wide operating temperature (working temperature -50°C/+200°C), good stability in use, low consistency and good construction performance. This product is not dry, Insoluble, it is a thermal conductive material suitable for use between the heat source and the radiator.

项目宣传视频： https://b2b.alighting.com/exh/1J6KWPVXU8/videodetail-3677.html

主要技术参数：

主要参数：

与国内外同类产品或同类技术的比较情况：

1.使用方法：
清洗待涂覆表面，除去油污；然后将导热硅脂直接挤出均匀的涂覆在待涂覆表面即可注
意施工表面应该均匀一致，只要涂敷薄薄一层即可。

2.注意事项：
导热硅脂的使用不是涂的越多越好，而是在填满间隙的前提下越薄越好

3.贮存运输：

1、25℃下阴凉干燥处贮存，贮存期为一年。

2、产品属于非危险品，可按一般化学品运输

1. How to use:
Clean the surface to be coated to remove oil stains; then directly squeeze out the thermal conductive silicone grease and evenly coat the surface to be coated.
It is intended that the construction surface should be uniform, as long as a thin layer is applied.

2. Matters needing attention:
The use of thermal grease is not as much as possible, but as thin as possible while filling the gap

3. Storage and transportation:
1. Store in a cool and dry place at 25℃, the storage period is one year.
2. The product is non-dangerous and can be transported as general chemicals

技术及工艺创新要点：

SMT-830灰色导热硅脂与一般的导热硅脂相比的优点：
1.导热系数高，导热系数达到3.0W/m.K，这是评价导热硅脂较重要的性能指标
2.油离度低,它的油离度指标为：200℃，8小时的条件下析油值≤2.0%

实际运用案例和用户评价意见：

典型用途：
广泛用作电子元器件的热传递介质，如CPU与散热器填隙，大功率三极管、可控硅元件
二极管与基材（铝、铜）接触的缝隙处的填充，降低发热元件的工作温度。

Typical use:
Widely used as a heat transfer medium for electronic components, such as CPU and radiator gap filling, high-power transistors, silicon controlled components
The filling of the gap between the diode and the substrate (aluminum, copper) in contact with the substrate reduces the operating temperature of the heating element.

申报单位介绍：

中山市丝密特硅胶制品有限公司是一个集产品研发、生产销售服务于一体有机硅粘剂的专业制造厂家。 公司主要产品有：太阳能硅胶、锂电池专用胶、电子密封胶、704/705/706防水胶、2600ML硅橡胶、面板灯胶、球泡胶、双组份灌封硅胶、洗墙灯玻璃胶、单组份黑白灰硅胶、导热硅脂、导热硅胶、环氧树脂AB胶等产品。我司经营品类繁多，可根据客户定制胶水。 质量是我们追求的永恒主题，是企业的生命，以质量求生存、以信誉求发展。公司将以“以人为本、不断创新、客户至上、诚信第一”为宗旨，树立良好的客户形象。欢迎大家来电、来访咨询，我们将以最大的诚意来为您服务！

Zhongshan Smit Silicone Products Co., Ltd. is a professional manufacturer of organic silicone adhesives integrating product development, production, sales and service. The main products of the company are: solar silica gel, special glue for lithium battery, electronic sealant, 704/705/706 waterproof glue, 2600ML silicone rubber, panel light glue, bulb glue, two-component potting silica gel, wall washer glass glue, One-component black and white ash silica gel, thermal grease, thermal conductive silicone, epoxy resin AB glue and other products. Our company handles a wide range of products and can customize glue according to customers. Quality is the eternal theme we pursue and the life of an enterprise. We strive for survival by quality and development by reputation. The company will establish a good customer image with the tenet of "people-oriented, continuous innovation, customer first, integrity first". Welcome everyone to call and visit for consultation. We will serve you with the greatest sincerity!

产品图片：