项目名称： 激光投射器-DREAM

Laser projector -DREAM

申报单位： 深圳市思奥特光电科技有限公司

综合介绍或申报理由：

在追求梦想的路上没有止境，全新一代DREAM Mk3系列全新精密紧凑机身设计，独立三层分离机体，极具现代感而又个性十足，专业级振镜，机械式激光安全闸刀，以行动，追寻梦想。

Dream can be limitless. The new generation of Dream MK3 series, adopts new precise compact design. Three-layer of isolated structure gives us the unique sense of fashion. Concentric-circle design for the lens can soften the tough appearance of the device. Dream are fantastic, so let’s pursue our dreams with actions.

主要技术参数：

如下图 The following figure

技术及工艺创新要点：

SD卡储存播放海量节目

SD card can store and play a large number of programs.

独具尖端科，采用智能手机芯片ARM方案，带有外置储存SD卡，具有高记忆容量、快速数据传输率、极大的移动灵活性以及很好的安全性，让你发挥无穷想象力。

We acquire high technology and adopt intelligent chip ARM project with outlaying SD card which has high memory capacity, fast data transfer rate,great moving flexibility and excellent safety, meeting your endless imagination.

通过DMX调用保存节目

DMX interface for recall the built in shows and customized texts saved

通过USITT DMX512协议直接调用SD卡节目库。

SD card program library is directly invoked through the USITT DMX512 protocol.

FB4控制系统

Powered by Pangolin FB4

内置FB4控制硬件，通过以太网连接，方便使用专业软件进行远距离激光效果编程，更加便捷的调试户外激光工程的整体效果。

The built-in Pangolin FB4 control system can control the laser effect at a longer distance through the connection of the network cable, and more conveniently regulate the overall effect of outdoor laser engineering.

完美色彩混光技术

Perfect Color Mixing

使用红绿蓝半导体激光器，亮度高，发散角小，相干性好，稳定性强，光束效果更加明亮鲜艳。全模拟激光驱动，完美呈现高清真彩激光效果。

Using all LD lasers, high brightness, small divergence angel, good coherence, strong stability, delivering brighter laser beams.

机械式激光安全闸刀

Security protection

当图案输出小于±1.5时，能在0.1秒内切断激光光路。确保不出现激光单点。配合，具备1T高速运算智能单片机芯片，通过复杂的多维运算比较，智能判断激光束的安全状况，当图案输出小于±1.5°时，就智能关断激光的激发信号。双重保护，双重安全。

When the image outputs less than +/-1.5°, it can turn off the laser light path to make sure not appear laser light spot. With 1T high velocity intelligent chip,through complex arithmetic comparison, it can judge the security of laser beam. When the mage outputs less than +/-1.5° , it can turn off the laser signal, double protection,double security.

独立三层式设计

Isolated three-layer design

全新精密紧凑机身设计，独立三层式设计，完美将激光光路、电路控制及散热风路独立而分，激光器合光层，硅胶密封，防尘，防水，防烟油。

Totally new design of precise compact design, independent three layers design, perfectly separating laser light path, circuit control and heat radiation. Laser light mixing layer, silica gel sealing, dust-proof, water-proof, oil-proof.

精密三维调节架

Three dimensional adjusting bracket

合光方式采用精密三维调节架，确保激光光斑的质量。

Precise three-dimensional adjusting bracket guarantees the quality of laser spot.

超大散热面积

Large heat radiator

300cm2 超大散热面积，确保激光器的热能交换。百页窗式进出风口后，内置2对3路高转速散热风扇，一吸一出，最有效的将交换热能带走。

300cm2 for heat radiation to make sure the heat interchange in laser. Window-shades for ventilating, two sets of high speed heat radiation fan, one for inhaling, one for exhaling, taking away the interchanging heat.

专业户外防雨恒温箱（选配）

Professional outdoor rainproof incubator (optional)

内设温度和湿度传感器，基于半导体泵浦激光器内部22-23度之间的最佳工作温度，当多方位传感器检测到温度低于18度时，散热风扇停止工作，内部加热丝工作，加热到20度停止工作；当温度高于20度或湿度大于70%时，启动风扇。（参数可根据现场环境手动设定）

Temperature and huity sensor inside, the best working temperature is 22-23°inside of diode-pumped solid-state laser. When sensor detects temperature lower than 18°, the fan will stop work, heater strip will work till the temperature up to 20°; when temperature higher than 20°huity more than 70%, fan will work.(the parameter can be set manually)

获奖、专利情况：

实用型专利：ZL 2010 2 0508229.3

Practical patent: ZL 2010 2 0508229.3

申报单位介绍：

思奥特集团旗下CR-LASER品牌，创始于2003年，为集团的始创品牌，前身为正大方圆，是中国最早经营激光演示系统的公司之一。专业从事激光表演系统，智能化演艺灯光产品的研发、生产、销售、工程项目为一体的综合性现代化企业。CR-LASER一直以To be Marvelous(创造无限精彩)为品牌口号，以引导激光发展潮流为追求，为各种表演场合带来震撼的视觉效果为目的，这些观念已促使CR-LASER 成为国内外领先的专业激光研发生产和舞台效果方案解决的提供商。

The CR-LASER brand of Siot Group, founded in 2003, is the groups original brand, formerly known as Zhengda Fangyuan, and is one of the earliest companies operating laser demonstration systems in China. Specializing in laser performance systems, intelligent performance lighting products research and development, production, sales, engineering projects as one of the comprehensive modern enterprises. CR-LASER has always taken "To be Marvelous" as its brand slogan, followed by guiding the trend of laser development and bringing shocking visual effects to various performance occasions. These concepts have prompted CR-LASER to become a leading provider of professional laser research and development and stage effect solutions at home and abroad.

产品图片：