评测

当前位置:首页 > 评测 > 新品发布 > 正文

众光雄鹰系列专业路灯——2020神灯奖申报产品

大件事要分享到:
2019-11-20 作者: 来源:江西众光照明科技有限公司 浏览量: 网友评论: 0

摘要: 众光雄鹰系列专业路灯,为江西众光照明科技有限公司2020神灯奖申报产品。


项目名称: 众光雄鹰系列专业路灯

ZHL- Eagle series professional street light

申报单位: 江西众光照明科技有限公司

综合介绍或申报理由:

众光雄鹰系列专业路灯综合介绍:

ZHL Eagle Series Professional Street Lights Comprehensive Introduction:

1、产品外观设计运用仿生学设计理念,外形灵动,曲线流畅;

The product design adopts the bionics design concept, the shape is smart and the curve is smooth;

2、产品结合LED灯具工程实例,采用海绵式散热方式,现将LED芯片产出的热量收集在灯壳上,通用低风阻系数设计曲面外形,空气流动学原理将热量散在空气中,实现LED芯片工作状态处于低温状态,保证灯具流明最大输出值;

The product combines the LED lamp engineering example, adopts the sponge type heat dissipation method, and now collects the heat generated by the LED chip on the lamp housing, the general low wind resistance coefficient design curved surface shape, the air flow principle disperses the heat in the air, realizes the LED chip The working state is in a low temperature state to ensure the maximum output value of the lumen of the lamp;

3、光学设计通过二次配光,采用进口光学级材料,应用二次曲线折射原理,增大距高比,达到节能效果;

The optical design adopts the secondary light distribution, adopts the imported optical grade material, applies the quadratic curve refraction principle, increases the distance to height ratio, and achieves the energy saving effect;

4、可靠性设计等到防雷10KV,IK10,IP66,扛盐雾500小时,适应长期在严酷户外环境使用;

Reliability design until lightning protection 10KV, IK10, IP66, 扛 salt spray for 500 hours, suitable for long-term use in harsh outdoor environments;

5、人性化维护设计,徒手拆装,免工具维护。

Humanized maintenance design, freehand disassembly, tool-free maintenance.

主要技术参数:

见附件图

Please see attached brochure.



技术及工艺创新要点:

1、 灯具外壳采用ADC12优质铝合金,一次压铸成形,产品内部气密性好,无气孔,密度大,强度高,通过IK10防护等级测试,壳体表面经过研磨,高温清洗,表面钝化,静电喷涂工艺后,抗盐雾等级可达500小时以上。

The lamp housing is made of ADC12 high-quality aluminum alloy, which is formed by one-time die-casting. The product has good air tightness, no air hole, high density and high strength. It is tested by IK10 protection grade. The surface of the shell is ground, high temperature cleaning, surface passivation, static electricity. After the spraying process, the salt spray testiing can reach more than 500 hours.

2、 灯具防水结构两层防水层设计独特,有效降低水压,防水等级IP66.

Waterproof structure of the lamp The two-layer waterproof layer is uniquely designed to effectively reduce water pressure and IP grade IP66.

3、 灯壳机加工采用免攻牙工艺,无需钻孔和攻牙,提高自动化生产率,减少工艺步骤同时保证品质的一致性,提高生产力。

The lamp housing is machined with a tapping-free process, eliminating the need for drilling and tapping, increasing automation productivity, reducing process steps while ensuring consistent quality and increasing productivity.

获奖、专利情况:


1.jpg2.jpg

是否有“智能设计”?

系统基本功能组成

The basic functions of the intelligent system are:

(一)、照明智能监控系统功能

Lighting intelligent monitoring system function

(二)、多种控制开关灯方式

Variety of control switch lights

(三)、多种开关灯执行方案

Variety of switching lights implementation

(四)、区域控制功能

Regional control function

(五)、自动检测功能

Automatic detection function

(六)故障报警功能

Fault alarm function

(七)数据处理、储存、查询和打印功能

Data processing, storage, query and printing functions

(八)地理图文显示功能

Geographical graphic display function

(九)远程抄表功能

Remote automatic meter reading function

(十)监控终端(集中控制器)现场调试和维护接口功能

Monitoring terminal (central controller) on-site debugging and maintenance interface function

(十一)系统增容扩容功能

System capacity expansion and expansion function

(十二)单灯控制运行功能

Single lamp control operation function-ZigBee

申报单位介绍:

江西众光照明科技有限公司致力于成为行业领先的工业工程照明企业,引领全球投光灯市场。公司投资10亿元建设的制造基地,占地面积305亩,总人数1500人,建筑面积17万平方米,同时配套500亩光电产业园,是全国最大的投光灯规模生产基地,同时是国内第一家实现从灯珠封装、电源生产、模具开发、壳体压铸、灯具组装为一体全产业链垂直整合的企业,行业优势突出。

公司坚持科技导向,每年投入的研发费用高达年销售额5%以上。历经10年沉淀,公司聚集了大量行业技术精英,拥有超过120人的研发团队,本科以上学历占80%,其中硕士16人,博士4人,同时公司长期和省内外高等院校建立了产学研合作关系,为江西“省级技术研发中心”、国家高新技术企业。

大力的科研投入,专业聚焦的匠心精神,带来公司产品技术的持续创新升级,平均10天产生一项新专利,现拥有300多项自主知识产权的LED核心技术专利,且每年在不断递增,完成了3个国家标准或地方LED相关标准制订,每季都有两个以上系列新产品投放市场,相关产品获得欧洲CE、EMC、ROHS,美国FCC、UL、DLC,澳大利亚SAA,日本SPE,韩国KC,以及中国3C等产品认证,获得广东省标杆产品认证,并进入广东省政府采购目录。

公司投资建设了现代化的LED生产车间和灯具装配中心,同时积极响应国家“中国制造 2025(工业4.0)计划”,投资建设国际领先水平的投光灯全自动化生产线,所有生产线均配备全自动电脑测试仪、贴片机、波峰焊、回流焊等先进生产和检验设备齐全,形成了灯珠封装、电源开发、模具制造、压铸、注塑、镀膜、喷涂、灯具组装的完整生产体系。从原材料采购入库到成品入仓,生产系统严格控制每道生产工序,实现生产过程的精益管理,率先成为德国莱茵TUV现场审核通过的GMC优质制造商,公司质量控制体系相继通过ISO9001:2008国际质量认证体系,UKAS英国皇家质量认证体系,以及IAF认证。

公司产品除国内市场以外,还远销欧盟、北美、韩国等发达国家,是欧斯朗、翠丰、喜万年、UK等国际灯具巨头的战略合作伙伴。功夫不负有心人,在众光人的努力拼搏下和广大客户的支持下,公司发展迅速,每年以100%的速度递增,并陆续获得“照明工程重点应用产品”、“高效绿色照明产品”、“广东省名牌产品”、“LED行业产品新锐奖”、“中国LED照明应用百强企业”、“福布斯中国非上市潜力企业百强”、 “江西省知识产权优势示范企业”、“专利申请倍增奖”等多项荣誉。

公司的愿景是成为全球工业工程照明第一名,为客户提供最优性价比的工业工程照明产品和服务,互惠互利,共同发展!激情梦想,众志成城,持之以恒,让众光照明照亮你我,照亮全世界!

产品图片:



凡本网注明“来源:阿拉丁照明网”的所有作品,版权均属于阿拉丁照明网,转载请注明。
凡注明为其它来源的信息,均转载自其它媒体,转载目的在于传递更多信息,并不代表本网赞同其观点及对其真实性负责。
| 收藏本文