IEC新发布“一般照明用自整流发光二极管”等24项标准
摘要： IEC 2009年6月上旬颁布的新标准目录
|
序 号 |
标准代号 |
发布时间 |
国际标准 分类号 （ICS） |
英文名称 |
中文名称 |
技术 委员会TC/SC |
|
1 |
IEC/TRF 60335-2-89 |
5/6/ 2009 |
|
This Test Report Form applies to IEC 60335-2-89:2002 + A1:2005 + A1/Ec1:2005 + A2:2007 with IEC 60335-1:2001 (incl. Corrigendum 1:2002) + A1:2004 |
该试验报告格式适用于IEC 60335- 2-89:2002 + A1: 2005 + A1/Ec1: 2005 + A2:2007 及 IEC 60335-1:2001 (包括勘误表1:2002) + A1:2004 |
|
|
2 |
IEC 60603-7-1 |
9 /6/ 2009 |
31.220.10 |
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors |
电子设备连接器——产品要求——第7-1部分：8路、屏蔽、无和有固定连接器详细规范 |
|
|
3 |
IEC 60904-4 |
9 /6/ 2009 |
27.160. |
Photovoltaic devices - Part 4: Reference solar devices - Procedures for establishing calibration traceability |
光电器件——第4部分：基准太阳能器件——建立校准可追溯性程序 |
82 |
|
4 |
IEC/PAS 61076-2-108 |
10 /6/ 2009 |
31.220.10 |
Connectors for electronic equipment - Product requirements - Part 2-108: Circular connectors - Detail specification for glass to metal seal style M12 connectors with screw-locking intended to mate with connectors conforming to IEC 61076-2-101 |
电子设备连接器——产品要求——第2-108部分：圆形连接器——有落定锁定的符合IEC 61072-2-101的玻封金属M12型连接器详细规范 |
|
|
5 |
IEC 61280-4-1 |
10 /6/ 2009 |
33.180.20 |
Fibre-optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement |
光纤通信试验程序——第4-1部分：绝缘电缆车间——多模衰变测量 |
|
|
6 |
IEC 61754-15 |
10 /6/ 2009 |
33.180.20 |
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 15: Type LSH connector family |
光纤连接器件和无源元件——光纤连接器接口——第15部分：LSH连接器系列 |
|
|
7 |
IEC 61754-24-21 |
10 /6/ 2009 |
33.180.20 |
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-21: Type SC-RJ connectors with protective housings based on IEC 61076-3-106, variant 06 |
光纤连接器件和无源元件——光纤连接器接口——第24-21部分： 基于IEC 61076-3-106变异06的有防护壳的SC-RJ型连接器 |
|
|
8 |
IEC 61754-24-11 |
10 /6/ 2009 |
33.180.20 |
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-11: Type SC-RJ connectors with protective housings based on IEC 61076-3-117 |
光纤连接器件和无源元件——光纤连接器接口——第24-11部分： 基于IEC 61076-3-117的有防护壳的SC-RJ型连接器 |
|
|
9 |
IEC 62223 |
10 /6/ 2009 |
29.080.10 |
Insulators - Glossary of terms and definitions |
绝缘体——术语和定义 |
36 |
|
10 |
IEC/PAS 62612 |
10 /6/ 2009 |
29.140.01; 31.080.10 |
Self-ballasted LED-lamps for general lighting services - Performance requirements |
一般照明用自整流发光二极管——性能要求 |
|
|
11 |
IEC 62467-1 |
9 /6/ 2009 |
11.040.50; 11.040.60 |
Medical electrical equipment - Dosimetric instruments as used in brachytherapy - Part 1: Instruments based on well-type ionization chambers |
医用电气设备——短程治疗用时剂量测定仪——第1部分：井型电离室基准仪器 |
|
|
12 |
IEC 62282-6-300 |
5/6/ 2009 |
27.070. |
Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability |
燃料电池技术——第6-300部分：燃料筒的互换性 |
|
|
13 |
IEC 62386-208 |
10 /6/ 2009 |
29.140.50 29.140.99 |
Digital addressable lighting interface - Part 208: Particular requirements for control gear - Switching function (device type 7) |
数字可设定地址的光界面——第208部分：控制装置专门要求——开关功能（设备类型7） |
|
|
14 |
IEC 62386-206 |
10 /6/ 2009 |
29.140.50; 29.140.99 |
Digital addressable lighting interface - Part 206: Particular requirements for control gear - Conversion from digital signal into d.c. voltage (device type 5) |
数字可设定地址的光界面——第206部分：控制开关专门要求——从数字信号转化为d.c.电压 （设备类型5） |
|
|
15 |
IEC 62386-205 |
9 /6/ 2009 |
29.140.50; 29.140.99 |
Digital addressable lighting interface - Part 205: Particular requirements for control gear - Supply voltage controller for incandescent lamps (device type 4) |
数字可设定地址的光界面——第205部分：控制开关专门要求——白炽灯电源控制器专门要求（设备类型4） |
|
|
16 |
IEC 62386-204 |
9 /6/ 2009 |
29.140.50; 29.140.99 |
Digital addressable lighting interface - Part 204: Particular requirements for control gear - Low voltage halogen lamps (device type 3) |
数字可设定地址的光界面——第204部分：控制开关专门要求——低压卤灯（设备类型3） |
|
|
17 |
IEC 62386-203 |
9 /6/ 2009 |
29.140.50; 29.140.99 |
Digital addressable lighting interface - Part 203: Particular requirements for control gear - Discharge lamps (excluding fluorescent lamps) (device type 2) |
数字可设定地址的光界面——第203部分：控制开关专门要求——放电管（不包括荧光灯，设备类型2） |
|
|
18 |
IEC 62386-202 |
9 /6/ 2009 |
29.140.50; 29.140.99 |
Digital addressable lighting interface - Part 202: Particular requirements for control gear - Self-contained emergency lighting (device type 1) |
数字可设定地址的光界面——第202部分：控制开关专门要求——自备式紧急照明（设备类型1） |
|
|
19 |
IEC 62386-201 |
10 /6/ 2009 |
29.140.50; 29.140.99 |
Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0) |
数字可设定地址的光界面——第201部分：控制开关专门要求——荧光灯（设备类型0） |
|
|
20 |
IEC 62386-102 |
9 /6/ 2009 |
29.140.50; 29.140.99 |
Digital addressable lighting interface - Part 102: General requirements - Control gear |
数字可设定地址的光界面——第102部分：总要求——控制器 |
|
|
21 |
IEC 62386-101 |
9 /6/ 2009 |
29.140. ; 29.140.50 |
Digital addressable lighting interface - Part 101: General requirements - System |
数字可设定地址的光界面——第101部分：总要求——系统 |
|
|
22 |
ISO/IEC 29138-2 |
10/6/ 2009 |
11.180.99; 35.240.80 |
Information technology —— Accessibility considerations for people with disabilities —— Part 2: Standards inventory |
信息技术——残疾人可达性考虑——第2部分：标准目录 |
|
|
23 |
ISO/IEC 29138-3 |
10/6/ 2009 |
11.180.99; 35.240.80 |
Information technology —— Accessibility considerations for people with disabilities —— Part 3: Guidance on user needs mapping |
信息技术——残疾人可达性考虑——第3部分：用户用地图指南 |
|
|
24 |
ISO/IEC 29138-1 |
10/6/ 2009 |
11.180.99; 35.240.80 |
Information technology —— Accessibility considerations for people with disabilities —— Part 1: User needs summary |
信息技术——残疾人可达性考虑——第1部分：用户需求指南 |
凡注明为其它来源的信息，均转载自其它媒体，转载目的在于传递更多信息，并不代表本网赞同其观点及对其真实性负责。
用户名： 密码：
