AB胶微量灌胶机
机器性能(Features)：
1. WINDOWS2000/XP中文操作界面，易学易懂；
(WINDOWS2000/XP Operating interface, easy to learn and understand.)
2. 灌胶形状可实现点、线、面、弧、圆或不规则曲线连续补间及三轴联动等功能，能适应任何不规则物件灌胶；
(Functions of drawing points, lines, surfaces, circle, consecutive complement of irregular curves and three axes linkage available, applicable to any irregular product potting. )
3. 硬盘有超大储存记忆容量，无限量存储程序，无需重新编程，且软体具有区域阵列，平移旋转运算等功能；
(Hard disk has super memory capacity for storage of program, and software has functions of regional array, translation, rotation and computation, etc.)
4.胶量大小粗细、涂胶速度、点胶时间、停胶时间皆可参数设定、出胶量稳定,不漏滴胶；
(Potting volume, speed, time, and halting time can be set by parameters; glue outflow is quite stable with no leaking or dripping.)
5.可选配CCD视觉编程系统，实现快速编程；
CCD visual programming optional, realizing fast programming process.
6.配胶、灌胶和轨迹灌封三种功能一体化实现，全自动操作；
(Full automatic process of glue mixing, potting, and various route potting.)
7.按需配比，实现边混合边灌胶，最大限度节约胶水；
(Glue mixed as needed before and in the process of potting, saving glue as much as possible.)
8.双料桶设计，A胶和B胶分开储料，保证胶水长时间放置不发生固化；
(Dual glue tanks to store A and B glue separately, helping to store glue for a long time.)
9.采用活塞计量泵精确计量，它吸入性能好，能抽吸各种不同介质、不同粘度的胶水；
Piston metering pump can precisely meter various medium of different viscosity.
10.料桶机架加高，活塞泵加高安装位，缩短输胶管道，减小管道内部的压力，提高点胶精度；
( Glue tank base heightened, piston pump installed at higher position, decreasing the length of glue tube and the pressure while increasing dispensing precision.)
11.混合比例从100：100到100：20或100：20~100：10可调，采用动态或静态混合，混合均匀、充分；
(Mixing ratio adjustable 100:100 to 100:20 or 100:20 to 100:10, dynamic or static mixing mode optional to ensure fully mixing.)
