AB胶自动配比灌胶机
1.WINDOWS XP中文操作界面，易学易懂；
(Operating interface of windows XP which is easy to learn;)
2.具有点、线、面、弧、圆、不规则曲线连续补间及三轴联动等功能，能适应任何不规则物件灌胶；
(Functions of drawing points, lines, surfaces, circle, consecutive interpolation of irregular curves and three axes linkage enables to pot any irregular workpieces; )
3.硬盘有超大储存记忆容量，无限量存储程序，无需重新编程，且软体具有区域阵列，平移旋转运算等功能；
(Hard disk has super memory capacity, and software has functions of regional array,translation,rotation and computation,etc;)
4.胶量大小粗细、涂胶速度、点胶时间、停胶时间皆可参数设定、出胶量稳定,不漏滴胶；
(The size of glue, speed of glue spread, dispensing time, time of halting dispensing can be set by parameters. With this method, glue outflow is quite stable without leaking and dripping; )
5.可选配CCD视觉编程系统，实现快速编程；
(Optional CCD visual programming system enables easy and quick programming.)
6.配胶、灌胶和轨迹灌封三种功能一体化实现，全自动操作；
(Fully automatic operation with integration of metering,potting,encapsulation function.)
7.按需配比，实现边混合边灌胶，最大限度节约胶水；
(Mixing on demand and potting at the same time to save glue.)
8.双料桶设计，A胶和B胶分开储料，保证胶水长时间放置不发生固化；
(Dual barrels to store A,B glue separately, which prevents gel in a long time.)
9.混合比例从100：100到100：20或100:20～100:10可调，采用动态或静态混合，混合均匀、充分；
(Optional dynamic or static mixing mode ensure fully mixing, and mixing ratio can be regulated 100:100 to 100:20 or 100:20 to 100:10 ;)
