LED驱动电源灌胶机
1. 采用触摸式中文操作界面，易学易懂，可储存30组灌胶参数，相同工件无需重新设定；
（Touch window interface，easy to learn and operate; 30 program parameters can be stored, no need to re-program for the same potting process.）
2. 胶量大小粗细、涂胶速度、点胶时间、停胶时间皆可参数设定、出胶量稳定,不漏滴胶；
(Potting volume, speed, time, and halting time can be set by parameters; glue outflow is quite stable with no leaking or dripping.)
3. 节省人工，一台设备可达传统5-6个人的产量；
（Saving labor cost while realizing capacity as high as 6 human worker. ）
4. 按需配比，实现边混合边灌胶，最大限度节约胶水；
(Glue mixed as needed before and in the process of potting, saving glue as much as possible.)
5. 双料桶设计，A胶和B胶分开储料，保证胶水长时间放置不发生固化；
(Dual glue tanks to store A and B glue separately, helping to store glue for a long time.)
6. 混合比例从100：100到100：20或100：20~100：10可调，采用动态或静态混合，混合均匀、充分；
(Mixing ratio adjustable 100:100 to 100:20 or 100:20 to 100:10, dynamic or static mixing mode optional to ensure fully mixing.)
7. 独有的控制系统，不受气压因素影响，避免出胶不均、拉丝、气泡等现象；
(Unique control system helps to avoid uneven potting, drawing and bubble in the potting process without impaction air pressure.)
