电子电器用有机硅密封胶
◎产品说明 PRODUCTS
电器用有机硅产品系列按固化体系分成缩合以及加成固化两种类型，按应用用途可以分为粘接密封和灌封披覆系列。
Silicone products for electronic application could be divided into condensation curing and addition cure according to chemical mechanism, or adhesion sealing and pottingseries according to application
◎粘结密封系列 ADHESION AND SEALING
有机硅粘接/密封产品对于大多数基材都具有良好的粘接密封性，之江有机硅的粘接/密封产品在电子、电器等行业得到广泛的应用。其产品特性如下：
· 良好的介电绝缘性能 · 抗外界污染、抗臭氧及紫外线性，卓越的耐候性
· 良好的化学稳定性 · 大范围的使用温度
· 优异的润湿性能 · 消除应力和良好的抗震性能
· 环保、不易燃
Zhijiang silicone’s adhesion and sealing products have good adhesion properties for most substrates. Zhijiang’s products have been widely used in electronics and application due to good performances:
·Good dielectric insulation ·Anti staining, anti ozone and ultra violet, excellent weatherproof
·Good chemical stability ·Wide temperature adaptation
·Good wetting property ·Eliminating stress and good vibration resistant property
·Environmentally protection, non-flammability
◎主要应用领域 MAIN APPLICATION AREAS
1.用于电子元件和组件的粘结与密封，具有耐高低温，抗老化，吸震缓冲，易于维修及卓越的密封防潮特性，例如电器柜；太阳能电池；电池；混合集成电路；TC热风扇与元件；电器制品；电源；传感器；荧光灯具；薄膜开关；军事电子器件；航空系统；LED，LCD，CRT显示板等。
Mainly for electronics parts and assemblage, sealing and adhesion, with high and low temperature proof, aging proof, vibration absorb, and impact cushion, easily repair and excellent anti humid properties, such as electrical cabinet, solar cell, cell, mixed integrated circuit, TC fan and parts, electrical appliances, power supply, sensor, fluorescence light, film switch, military electronics units, airplane system, LED，LCD，CRT display etc.
2.应用于家用电器上面，如：咖啡壶、微波炉，发热管等高温元件的粘合与密封，耐高温部位（连续使用温度260度）如：电熨斗，电炸锅等；
The above applies to household appliances. Small home utensils like such high temperature appliance as coffee pot, microwave oven or heating pipe, high temperature proof (applied continuously at 260 degree),: electrical iron, electrical frying pot.
3.用于工业电子电器上面，如：线路和导电接脚及周围进行密封；将电源模块上供应器的元件固定，增加机械稳定性，或在印刷电路板上组装元件；也可用于金属法兰及需要耐油的机械或动力设备。
Above for the industrial electrical and electronic. Seal around circuit or conductive contact point, fix power module, gap filling for box or modules, assemblage of units in printed circuit, or metal flange and oil resistant mechanical and engine equipments.
◎技术指标（供参考）TECHNICAL DATAS
注：测试条件为温度23~25℃，相对湿度50±5%下固化7天。表中数据仅供参考，请以实测数据为准。
◎操作及安全 SAFETY AND APPLICATIONS
1. 用适当的溶剂例如酒精，丙酮，甲乙酮等，彻底清洁底材表面；
All surfaces must be clean and dry. Degrease and wash off any contaminants that could impair adhesion. Suitable solvents include isopropyl alcohol, acetone, or methyl ethyl ketone.
2. 未固化密封胶不可接触眼睛，若不慎接触，请用水冲洗，并与医生联系；
Not contact eyes with uncured sealant and wash by water once contaminated.
3.请避免长时间接触皮肤，否则可能引起发痒。
Avoid long time to exposure to skin.
◎颜色及包装 SAFETY AND PACKAGE
常规颜色有黑色，白色，还可按照客户要求生产特种颜色，采用300ml塑料胶管或100ml铝管包装包装。
Black,white available,customer tailored,in 300-ml or 100-ml cartridges.
◎储存及有效期 STORAGE AND SHELF LIFE
属于非危险品，请储存于温度在27℃以下的阴凉干燥处，有效期为9个月
It has 9 months usable life from the date of manufacture. Stored under cool and dry place.
