Function Generator PT-5202
Frequency intercommunity |
| ||||
Frequency range | 0.5Hz ~ 3MHz，With five digits LED display，Maximum resolution 0.001Hz，it is divided into six file, and use the rotary switch to selection |
| |||
Input waveform | Totally have six wave form. Oblique wave, triangle wave, sine wave, square wave, is pulse wave and negative pulse. knobbing switch can directly choose output |
| |||
Stability | 0.1%-In the boot after 15 minutes. 0.2%-In the boot after 24 hours |
| |||
Dc offset | Continuous variable、 switch isolation dc; Maximum range + - 10V(unloaded)， + - 5V(50Ωload) |
| |||
Oblique wave |
| ||||
Frequency range | 0.5Hz ~ 2.5MHz，With five digits LED display |
| |||
Maximum resolution | 0.001Hz |
| |||
Symmetry proportion | Compare with 15%( Decline range) ,the 85%( Up band)＜5%(1Hz ~ 100KHz) |
| |||
Rising wave linear | ＜1%(1Hz ~ 100KHz) |
| |||
Triangular wave |
| ||||
Frequency range | 0.5Hz ~ 3MHz，With five digits LED display |
| |||
Maximum resolution | 0.001Hz |
| |||
Symmetry proportion | Compare with 15%( Decline range) ,the 50%( Up band)＜5%(1Hz ~ 100KHz) |
| |||
Linear | ＜1%(1Hz ~ 100KHz) |
| |||
Sine wave. |
| ||||
Frequency range | 0.5Hz ~ 3MHz，With five digits LED display |
| |||
Maximum resolution | 0.001Hz |
| |||
symmetry | Compare with 50%( Decline range) ,the 50%( Up band)＜5%(1Hz ~ 100KHz) |
| |||
distortion | ＜1% to 100KHz |
| |||
Harmonic proportion | ＜30dB to 3MHz |
| |||
Frequency response | ＜0.1dB to 100MHz ＜1dB to 3MHz |
| |||
Square wave |
| ||||
Frequency range | 0.5Hz ~ 3MHz，With five digits LED display |
| |||
Maximum resolution | 0.001Hz |
| |||
Symmetry | Compare with 50%( Negative half cycle) ,the 50%( The positive half cycle)error＜1% to 100KHz |
| |||
Rise time | ＜60nS |
| |||
Is pulse wave |
| ||||
Frequency range | 0.5Hz ~ 2.5MHz，With five digits LED display |
| |||
Maximum resolution | 0.001Hz |
| |||
Is pulse width | 0.4sec ~ 100nS(Continuous adjustable) |
| |||
Symmetry | Compare with 85%( Negative baseline),the 15%( Is pulse wave)error 5% to 100KHz |
| |||
Rise time | ＜60nS |
| |||
Negative pulse wave |
| ||||
Frequency range | 0.5Hz ~ 2.5MHz，With five digits LED display |
| |||
Maximum resolution | 0.001Hz |
| |||
Negative pulse width | 0.4sec~100nS |
| |||
Symmetry | Compare with 15%( Negative pulse wave) ,the 85%( Is base)error＜5% to100KHz |
| |||
Fall time | ＜60nS |
| |||
Synchronous output end |
| ||||
Output impedance | 50Ω，error＜2% |
| |||
Max output | 20Vp-p(Unloaded )，0.05Vp-p(50Ωload) error： + - 0.5V |
| |||
Min output | 0.1Vp-p(unloaded)，0.05Vp-p(50Ωload) |
| |||
-20dB An Attenuation switch ; Attenuation error:＜2% |
| ||||
Synchronous output end |
| ||||
Output level | TTL level，＞3Vp-p Fixed amplitude |
| |||
Fan three-dimensional | ＞20 |
| |||
Rise time | ＜30nS |
| |||
VCF input |
| ||||
Input level | 0~10V Voltage input |
| |||
Maximum frequency change guy | 1 : 1 ~ 1 : 1000 |
| |||
Input frequency | DC ~ 1KHz |
| |||
Scanning synchronous output end |
| ||||
Output resistance | 1KΩ，error＜2% |
| |||
Output waveform | LINEAR or LOG scan Oblique wave |
| |||
Output amplitude | 10Vp-p(unloaded)，5Vp-p(51KΩload) |
| |||
output frequency | Continuous variable，0.2Hz ~ 100Hz |
| |||
Scanning generator |
| ||||
scan mode | LINEAR/ LOG scan ，With switch |
| |||
scan rate | 5sec ~ 10mS，Continuous variable |
| |||
run length | 1 : 1 ~ 1 : 100(with frequency control to use) |
| |||
frequency counter |
| ||||
Communality | - |
| |||
Five digits、0.36 inches high brightness red 、LED display |
| ||||
Maximum resolution | 0.001Hz |
| |||
Unit | Hz/KMz |
| |||
TIME BASE | 20MHz |
| |||
Temperature coefficient | ＜10PPM/° |
| |||
Error | ＜0.002% ±single order |
| |||
Power supply | +5V / 160mA |
| |||
Internal frequency counter |
| ||||
Gear | Automatic shift ：(0.001Hz/0.01Hz/0.001KHz/0.01KHz) |
| |||
Meter frequency range | 0.500Hz ~ 3000.0KHz，Automatic selection point and display unit |
| |||
Gate | Variable 0.25sec ~ 2 sec and automatic setting |
| |||
Minimum display digits | Four files |
| |||
External meter frequency |
| ||||
Peak voltage input | ＜250Vrms |
| |||
input resistance | 1M , error＜2% |
| |||
Input frequency range | 0.2Hz ~ 60MHz |
| |||
Attenuation open levels | x20(-26nB) an Attenuation switch |
| |||
COUPLING | AC(HF)—measure 100KHz (and above frequency)，Through the capacitor into speed . |
| |||
GATE TIME | Variable 0.25sec ~ 10 sec 、 base on the input frequency to set automatically |
| |||
Gear | Automatic shift (0.001Hz/0.01Hz/0.001KHz/0.1KHz/1KHz) Five kinds of resolutions，CPU can Automatic choose one of them. |
| |||
Minimum display digits | Four files |
| |||
Input sensitivity | ＜30mVrms(1MHz) |
| |||
Frequency counter display value/gate/operation range table |
| ||||
Standard values | GATE TIME | INT | EXT.HF | EXT.LF |
|
0.2Hz | 10S | ﹍ | ﹍ | 0.200Hz |
|
0.5Hz | 2S | 0.500Hz | ﹍ | 0.500Hz |
|
1Hz | 1S | 1.000Hz | ﹍ | 1.000Hz |
|
10Hz | 0.25S | 10.000Hz | ﹍ | 10.000Hz |
|
100Hz | 0.25S | 100.00Hz | ﹍ | 100.00Hz |
|
1KHz | 0.25S | 1.000KHz | ﹍ | 1.000KHz |
|
10KHz | 0.25S | 10.000KHz | ﹍ | 10.000KHz |
|
100KHz | 0.25S | 100.0KHz | 100.00KHz | 100.0KHz |
|
1MHz | 0.25S | 1000.0KHz | 1000KHz | ﹍ |
|
10MHz | 0.25S | ﹍ | 10000KHz | ﹍ |
|
60MHz | 0.25S | ﹍ | 60000KHz | ﹍ |
|
General characteristics | |||||
Operating environment | temperature:0 ~ 40 ; humidity 0 ~ 90% |
| |||
Operating Voltage | AC 115V(+-10%) 50/60Hz , FUSE 600mA。 |
| |||
Consumed power | Max 25VA(W) |
| |||
Scattered heat | Dedicated heat removal fan DC 12V/100mA |
| |||
Security certification | CE,GS,UL,CUL (Inspection qualified) |
| |||
Size | 275mm(width) x 90mm(Height) x 300mm( depth) |
| |||
Weight | 2.5Kg(Net) |
| |||
Attached | specification，Power cord |
| |||
, nsparent; PADDING-LEFT: 5.4pt; WIDTH: 295.25pt; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; BORDER-RIGHT: black 1pt solid; PADDING-TOP: 0cm; mso-border-bottom-alt: solid black .5pt; mso-border-right-alt: solid black .5pt; mso-border-top-alt: solid black .5pt" width=394 colSpan=4>
Compare with 85%( Negative baseline),the 15%( Is pulse wave)error 5% to 100KHz
Rise time
＜60nS
Negative pulse wave
Frequency range
0.5Hz ~ 2.5MHz，With five digits LED display
Maximum resolution
0.001Hz
Negative pulse width
0.4sec~100nS
Symmetry
Compare with 15%( Negative pulse wave) ,the 85%( Is base)error＜5% to100KHz
Fall time
＜60nS
Synchronous output end
Output impedance
50Ω，error＜2%
Max output
20Vp-p(Unloaded )，0.05Vp-p(50Ωload) error： + - 0.5V
Min output
0.1Vp-p(unloaded)，0.05Vp-p(50Ωload)
-20dB An Attenuation switch ; Attenuation error:＜2%
Synchronous output end
Output level
TTL level，＞3Vp-p Fixed amplitude
Fan three-dimensional
＞20
Rise time
＜30nS
VCF input
Input level
0~10V Voltage input
Maximum frequency change guy
1 : 1 ~ 1 : 1000
Input frequency
DC ~ 1KHz
Scanning synchronous output end
Output resistance
1KΩ，error＜2%
Output waveform
LINEAR or LOG scan Oblique wave
Output amplitude
10Vp-p(unloaded)，5Vp-p(51KΩload)
output frequency
Continuous variable，0.2Hz ~ 100Hz
Scanning generator
scan mode
LINEAR/ LOG scan ，With switch
scan rate
5sec ~ 10mS，Continuous variable
run length
1 : 1 ~ 1 : 100(with frequency control to use)
frequency counter
Communality
-
Five digits、0.36 inches high brightness red 、LED display
Maximum resolution
0.001Hz
Unit
Hz/KMz
TIME BASE
20MHz
Temperature coefficient
＜10PPM/°
Error
＜0.002% ±single order
Power supply
+5V / 160mA
Internal frequency counter
Gear
Automatic shift ：(0.001Hz/0.01Hz/0.001KHz/0.01KHz)
Four kinds of resolutions，CPU can Automatic choose one of them.
Meter frequency range
0.500Hz ~ 3000.0KHz，Automatic selection point and display unit
Gate
Variable 0.25sec ~ 2 sec and automatic setting
Minimum display digits
Four files
External meter frequency
Peak voltage input
＜250Vrms
input resistance
1M , error＜2%
Input frequency range
0.2Hz ~ 60MHz
Attenuation open levels
x20(-26nB) an Attenuation switch
COUPLING
AC(HF)—measure 100KHz (and above frequency)，Through the capacitor into speed .
DC(LF)100KHz FILTER—measure 100KHz (and the following frequency, direct coupling)
GATE TIME
Variable 0.25sec ~ 10 sec 、 base on the input frequency to set automatically
Gear
Automatic shift (0.001Hz/0.01Hz/0.001KHz/0.1KHz/1KHz) Five kinds of resolutions，CPU can Automatic choose one of them.
Minimum display digits
Four files
Input sensitivity
＜30mVrms(1MHz)
Frequency counter display value/gate/operation range table
Standard values
GATE TIME
INT
EXT.HF
EXT.LF
0.2Hz
10S
﹍
﹍
0.200Hz
0.5Hz
2S
0.500Hz
﹍
0.500Hz
1Hz
1S
1.000Hz
﹍
1.000Hz
10Hz
0.25S
10.000Hz
﹍
10.000Hz
100Hz
0.25S
100.00Hz
﹍
100.00Hz
1KHz
0.25S
1.000KHz
﹍
1.000KHz
10KHz
0.25S
10.000KHz
﹍
10.000KHz
100KHz
0.25S
100.0KHz
100.00KHz
100.0KHz
1MHz
0.25S
1000.0KHz
1000KHz
﹍
10MHz
0.25S
﹍
10000KHz
﹍
60MHz
0.25S
﹍
60000KHz
﹍
General characteristics
Operating environment
temperature:0 ~ 40 ; humidity 0 ~ 90%
Operating Voltage
AC 115V(+-10%) 50/60Hz , FUSE 600mA。
AC 230V (+-10%) 50/60Hz , FUSE 300mA
Consumed power
Max 25VA(W)
Scattered heat
Dedicated heat removal fan DC 12V/100mA
Security certification
CE,GS,UL,CUL (Inspection qualified)
Size
275mm(width) x 90mm(Height) x 300mm( depth)
Weight
2.5Kg(Net)
Attached
specification，Power cord
, nsparent; PADDING-LEFT: 5.4pt; WIDTH: 295.25pt; PADDING-RIGHT: 5.4pt; BORDER-TOP: #ece9d8; BORDER-RIGHT: black 1pt solid; PADDING-TOP: 0cm; mso-border-bottom-alt: solid black .5pt; mso-border-right-alt: solid black .5pt; mso-border-top-alt: solid black .5pt" width=394 colSpan=4>
Compare with 85%( Negative baseline),the 15%( Is pulse wave)error 5% to 100KHz
Rise time
＜60nS
Negative pulse wave
Frequency range
0.5Hz ~ 2.5MHz，With five digits LED display
Maximum resolution
0.001Hz
Negative pulse width
0.4sec~100nS
Symmetry
Compare with 15%( Negative pulse wave) ,the 85%( Is base)error＜5% to100KHz
Fall time
＜60nS
Synchronous output end
Output impedance
50Ω，error＜2%
Max output
20Vp-p(Unloaded )，0.05Vp-p(50Ωload) error： + - 0.5V
Min output
0.1Vp-p(unloaded)，0.05Vp-p(50Ωload)
-20dB An Attenuation switch ; Attenuation error:＜2%
Synchronous output end
Output level
TTL level，＞3Vp-p Fixed amplitude
Fan three-dimensional
＞20
Rise time
＜30nS
VCF input
Input level
0~10V Voltage input
Maximum frequency change guy
1 : 1 ~ 1 : 1000
Input frequency
DC ~ 1KHz
Scanning synchronous output end
Output resistance
1KΩ，error＜2%
Output waveform
LINEAR or LOG scan Oblique wave
Output amplitude
10Vp-p(unloaded)，5Vp-p(51KΩload)
output frequency
Continuous variable，0.2Hz ~ 100Hz
Scanning generator
scan mode
LINEAR/ LOG scan ，With switch
scan rate
5sec ~ 10mS，Continuous variable
run length
1 : 1 ~ 1 : 100(with frequency control to use)
frequency counter
Communality
-
Five digits、0.36 inches high brightness red 、LED display
Maximum resolution
0.001Hz
Unit
Hz/KMz
TIME BASE
20MHz
Temperature coefficient
＜10PPM/°
Error
＜0.002% ±single order
Power supply
+5V / 160mA
Internal frequency counter
Gear
Automatic shift ：(0.001Hz/0.01Hz/0.001KHz/0.01KHz)
Four kinds of resolutions，CPU can Automatic choose one of them.
Meter frequency range
0.500Hz ~ 3000.0KHz，Automatic selection point and display unit
Gate
Variable 0.25sec ~ 2 sec and automatic setting
Minimum display digits
Four files
External meter frequency
Peak voltage input
＜250Vrms
input resistance
1M , error＜2%
Input frequency range
0.2Hz ~ 60MHz
Attenuation open levels
x20(-26nB) an Attenuation switch
COUPLING
AC(HF)—measure 100KHz (and above frequency)，Through the capacitor into speed .
DC(LF)100KHz FILTER—measure 100KHz (and the following frequency, direct coupling)
GATE TIME
Variable 0.25sec ~ 10 sec 、 base on the input frequency to set automatically
Gear
Automatic shift (0.001Hz/0.01Hz/0.001KHz/0.1KHz/1KHz) Five kinds of resolutions，CPU can Automatic choose one of them.
Minimum display digits
Four files
Input sensitivity
＜30mVrms(1MHz)
Frequency counter display value/gate/operation range table
Standard values
GATE TIME
INT
EXT.HF
EXT.LF
0.2Hz
10S
﹍
﹍
0.200Hz
0.5Hz
2S
0.500Hz
﹍
0.500Hz
1Hz
1S
1.000Hz
﹍
1.000Hz
10Hz
0.25S
10.000Hz
﹍
10.000Hz
100Hz
0.25S
100.00Hz
﹍
100.00Hz
1KHz
0.25S
1.000KHz
﹍
1.000KHz
10KHz
0.25S
10.000KHz
﹍
10.000KHz
100KHz
0.25S
100.0KHz
100.00KHz
100.0KHz
1MHz
0.25S
1000.0KHz
1000KHz
﹍
10MHz
0.25S
﹍
10000KHz
﹍
60MHz
0.25S
﹍
60000KHz
﹍
General characteristics
Operating environment
temperature:0 ~ 40 ; humidity 0 ~ 90%
Operating Voltage
AC 115V(+-10%) 50/60Hz , FUSE 600mA。
AC 230V (+-10%) 50/60Hz , FUSE 300mA
Consumed power
Max 25VA(W)
Scattered heat
Dedicated heat removal fan DC 12V/100mA
Security certification
CE,GS,UL,CUL (Inspection qualified)
Size
275mm(width) x 90mm(Height) x 300mm( depth)
Weight
2.5Kg(Net)
Attached
specification，Power cord
