广州德肯电子有限公司 >
产品 > N difference probe - 1% N1030A（3000V，50MHz
N difference probe - 1% N1030A（3000V，50MHz
Product Introduction | |
Product Name | N1030A (3000Vp-p,50MHz) |
Short Description | PINTECH N1030A（50MHz X100 X1000 3000Vp-p） |
Specification | |
Bandwidth | 50MHz |
Accuracy | ±1% |
Input Impedance | 4MΩ//7 p F each side ground |
Input Voltage | |
-Swing(into 50 KΩ load) | ±7V |
-Offset(typical) | ＜±5Mv |
Typical | 50Ω(for using 1M ohm input system oscilloscope) |
Power Supply | |
-Options | power leads |
Length of BNC Cable | 90cm |
Length of Input Leads | 30cm |
Weight | 500g |
(L×W×H) |
|
Attenuation Ratio | 1:1000/100 |
CMRR(typical) | -80dB@60Hz,-50d B@1MHz |
maximum input differential-mode voltage (DC+ Peak AC) | ±3000V@1/1000 ±300V@1/100 |
Maximum input and ground potential difference (DC +Peak AC) | ±3000V@1/1000＆ 1/100 |
(CMRR) | 1000V rms CATⅢ |
