评测

当前位置:首页 > 评测 > 新品发布 > 正文

E26转接灯头LH2150A——2021神灯奖申报技术

大件事要分享到:
2020-12-23 作者: 来源:东莞市绿环电器有限公司 浏览量: 网友评论: 0

摘要: E26转接灯头LH2150A,为东莞市绿环电器有限公司2021神灯奖申报技术。


项目名称: E26转接灯头LH2150A

E26 adapter lamp holder LH2150A

申报单位: 东莞市绿环电器有限公司

综合介绍或申报理由:

东莞市绿环电器有限公司是LED照明灯座定制商,专注照明灯座及转换器的研发、生产与销售于一体的企业。 本公司主要的产品有陶瓷灯座、灯头、转换灯座、灯座转换头,筒灯转接头,产品有获得UL、CE、PSE、ROHS、SGS等第三证书或者测试报告。

Dongguan Luhuan Electric Co., Ltd. is an LED lighting lamp holder customizer, focusing on the R&D, production and sales of lighting lamp holders and converters. The companys main products include ceramic lamp holders, lamp holders, conversion lamp holders, lamp holder conversion heads, downlight adapters, products have obtained UL, CE, PSE, ROHS, SGS and other third certificates or test reports.

项目宣传视频: https://b2b.alighting.com/exh/SDTN1TSFW9/videodetail-3802.html

主要技术参数:

额定电压: 600V(V)

额定电流: 660W(A)

外壳材质:PBT

耐热温度:180(℃)

产品材质:PBT 配套适用连接器:HRB、OJ、IDEAL182、TE等

Rated voltage: 600V (V)

Rated current: 660W (A)

Shell material: PBT

Heat-resistant temperature: 180 (℃)

Product material: PBT

Supporting applicable connectors: HRB, OJ, IDEAL182, TE, etc.

技术及工艺创新要点:

1、安装灯座:所有灯座安排过程中,请断电后操作,并按照正确的接电方式通电,已免出现漏电、触电等情况,严禁私自外接电源。

2、电流电压:所有灯座均有电流电压要求,通电不能超过规定,特别注明老化、亮度测试时,统一相同电流,相同电压检测,才能保证检测结果的一致性。

3、耐温耐热:PP塑胶温度不超过90度,PBT、PC塑胶温度不超过180度,LCP温度不超过210度,陶瓷温度不超过250度。 电子线温度不超过90度,硅胶线温度不超过180度,铁弗龙线温度不超过180度。

1. Installing the lamp holder: During the arrangement of all lamp holders, please operate after power off, and power on according to the correct connection method to avoid electric leakage, electric shock, etc., and it is strictly forbidden to connect external power without permission.

2. Current and voltage: All lamp holders have current and voltage requirements, and the power cannot exceed the regulations. When aging and brightness tests are specified, the same current and the same voltage are tested to ensure the consistency of the test results.

3. Heat resistance: PP plastic temperature does not exceed 90 degrees, PBT, PC plastic temperature does not exceed 180 degrees, LCP temperature does not exceed 210 degrees, and ceramic temperature does not exceed 250 degrees. The temperature of the electronic wire does not exceed 90 degrees, the temperature of the silicone wire does not exceed 180 degrees, and the temperature of the Teflon wire does not exceed 180 degrees.

实际运用案例和用户评价意见:

配套适用连接器:HRB、OJ、IDEAL182、TE等

Supporting applicable connectors: HRB, OJ, IDEAL182, TE, etc.

申报单位介绍:

东莞市绿环电器有限公司位于中国制造之都-东莞市寮步镇,是一家集产品研发、生产、销售于一体的国民基础产业企业,主要产品有:灯头灯座、LED贴片及LED电光源灯具。本公司除生产传统的灯头灯座(有G4、MR16、G9、GU10、E14、E27、G53等11个系列120款产品),LED灯座转换器(有E11、E12、E14、E17、E26、E27、B22、GU10、G24、GU24、弯管转换、万向转换等15个系列230款产品),为配套客户需求,我公司于2015年上马LED光源生产项目,可承接LED贴片(2835/3528/3014/5050/5730等型号),并自行研发生产LED吹空灯,G9灯饰发光小灯泡等光源产品。

产品图片:


凡本网注明“来源:阿拉丁照明网”的所有作品,版权均属于阿拉丁照明网,转载请注明。
凡注明为其它来源的信息,均转载自其它媒体,转载目的在于传递更多信息,并不代表本网赞同其观点及对其真实性负责。
| 收藏本文